FIRST IN PHOTONICS
Cutting Edge Optronics (a divison of Northrop Grumman Space Technology), is the leading provider of high-power diode laser arrays, high power pump modules and DPSS lasers.
Cutting Edge Optronics (CEO) are a vertically integrated manufacturer capable of supplying unmounted diode bars, packaged laser diodes, DPSS modules, laser diode drivers and complete DPSS laser systems. CEO diode laser based products have become industry standards, and are used in a wide variety of commercial and military applications.
The Patara diode-pumped solid-state (DPSS) laser systems are now available to include Nd:YLF, Nd:YAG, and Nd:YVO4 versions with up to 250 Watts of output power at repetition rates from 1kHz to 100kHz.
CEO's new Gigashot DPSS laser is the next generation of high energy, short pulse Nd:YAG laser systems.
These laser diode arrays from Cutting Edge Optronics (CEO) are offered on a variety of heat sink package types that are conductively cooled.
Golden Bullet and Silver Bullet laser diode array submodules are available from Cutting Edge Optronics. Golden Bullet submodules are available in wavelengths 790-980nm and silver bullet submodules available in wavelengths 790-1550nm
Cutting Edge Optronics lensed diode arrays are available in conductively cooled or water cooled modules. 17W CW per bar for conductively cooled modules, 45W or 500W per bar for water cooled modules.
High powered diode laser stacks from Cutting Edge Optronics (CEO) are offered with up to 100 Watts CW per bar in wavelengths from 790nm to 980nm with optional lenses for reduced divergence.
Unmounted laser diode bars are available at a variety of wavelengths in CW or QCW versions with power ratings from 20 Watts to 200 Watts.
Many types of water-cooled packages are offered including linear arrays and diode stacks with CW power output from 20W to 680W and Quasi-CW power output of 500W at wavelengths 790nm to 1550nm..
The RB Plus Nd:YLF diode pumped laser modules from Cutting Edge Optronics are a new addition to their RB Plus family of CW laser pump modules and are ideally suited for use in Particle Image Velocimetry (PIV) or other high pulse energy applications.
The RB Plus family of diode pumped solid-state modules from Cutting Edge Optronics is a second generation Nd:YAG module that has become the industry standard DPSS pump source. CEO's diode-pumped laser module is offered at power levels up to 100 Watts CW in a simple, compact, and affordable package.
The RBA Gold family of CW DPSS modules from Cutting Edge Optronics is offered at power levels up to 100 Watts in a simple, compact, and affordable package.
The use of QCW pulsed pumped laser diodes enable CEO's RBA PowerPULSE family of modules to deliver output energies up to 400mJ per pulse.
With CW power ranges from 10W to 100W, Cutting Edge Optronics' SilentLight module has been designed to meet the needs of high finesse (single transverse mode, low noise) Q-switched laser applications.
REA PowerPULSE series module from Cutting Edge Optronics is ideally suited for applications that require up to 4 J per pulse. The module supports large diameter rods and high QCW bar counts.
The REA-Series Laser Module from Cutting Edge Optronics is a DPSS pump chamber offering power ranges of 130W all the way to 650W of CW power at 1064nm.
Cutting Edge Optronics' RB Plus Nd:YVO4 diode pumped CW laser module is perfect for fiber laser amplification requirements. It's side-pumping geometry provides an unparallel small signal gain.
The eDrive Aero fiber diode driver from Cutting Edge Optronics is designed for driving internal fiber coupled diodes, with all aspects of the laser system controlled from this one unit.
The eDrive controller from Cutting Edge Optronics is a next generation diode laser system controller. Designed to interface with an external power supply, it manages all critical DPSS laser parameters.
The eDrive Nitro laser diode driver from Cutting Edge Optronics integrates a standard eDrive with optional power supplies, RF drivers and other accessories all in one compact, rack-mounted housing.